Intel Xeon E-Series dedicated servers

Intel Xeon E-Series Dedicated Servers

Single-processor dedicated servers built on Intel Xeon E-2388G, E-2386G and E-2288G CPUs. Base clock speeds from 3.20 GHz to 3.70 GHz make them a practical fit for workloads that depend on fast individual cores, such as game servers, web applications and databases.

  • High Per-Core Speed: Base clocks of 3.20 GHz, 3.50 GHz and 3.70 GHz across the three processors, with 6 to 8 cores.
  • Dedicated Hardware: The full physical server is yours, with no CPU, RAM or storage shared with other customers.
  • Configurable Servers: Select upgrades for RAM, storage and bandwidth when you configure your server.
  • RAID, IPv4 & BGP Options: Software RAID 0, 1 and 10, extra IPv4 addresses and subnets, and optional BGP are available.
View Xeon E-Series Servers →

Loading Server Configurations...

When a Xeon E-Series Server Is the Right Choice

Xeon E-Series processors are single-socket server CPUs. They offer fewer cores than dual-processor Xeon Scalable or AMD EPYC systems, but they run at high per-core clock speeds. That trade-off suits software where the speed of one or two busy threads sets overall performance, and it is often more economical than paying for cores your application will not use.

Because the whole server is dedicated to you, CPU time, memory and disk throughput are not shared with other customers, so performance stays consistent from day to day. These are the workloads where this class of server is most often used:

Game Servers

Many game servers do most of their simulation work on one main thread, so per-core speed often limits tick rate. Pick a model with enough cores and RAM for the number of game instances, players and mods you plan to run.

Websites & Web Applications

PHP, Node.js, Python and similar stacks handle each request on a single thread, so faster cores can shorten response times. With 6 to 8 cores you can run a web server, application and cache on the same machine.

Databases

MySQL, MariaDB and PostgreSQL workloads with many small or serial queries benefit from fast cores. Memory and storage layout matter just as much, so size RAM for your working set and consider RAID 1 or RAID 10 on multi-drive configurations.

Development, Build & CI Servers

Compile steps and test suites that cannot be fully split across cores finish sooner on fast ones. The 8-core, 16-thread models also leave room to run several jobs in parallel.

Event-Driven & Latency-Sensitive Software

Applications that process messages in order, such as queue consumers, API back ends and real-time services, depend on single-thread speed. Network latency also depends on location, so choose the data center closest to the systems you connect to.

Staging & Small Virtualization Labs

An 8-core, 16-thread server can host a handful of virtual machines under KVM or Proxmox. For larger virtualization clusters with many VMs, a CPU with more cores is a better fit.

The Xeon E-Series Processors on This Page

The server list above includes three processors. Here is how they compare on the specifications that matter most for choosing between them.

Intel Xeon E-2388G

3.20 GHz · 8 Cores · 16 Threads

An E-2300 generation processor and the highest thread count of the E-2300 models listed here. A good choice when you want both parallelism and solid per-core speed, for example a busy game host or a web stack that includes its own database.

Intel Xeon E-2288G

3.70 GHz · 8 Cores · 16 Threads

The highest base clock of the three, with the same 8 cores and 16 threads as the E-2388G. It belongs to the earlier E-2200 generation. Consider it when raw per-core speed matters most.

Intel Xeon E-2386G

3.50 GHz · 6 Cores · 12 Threads

An E-2300 generation processor with a 3.50 GHz base clock and 6 cores. A balanced middle option for workloads that need more than a handful of threads but not the full 8 cores.

Xeon E-Series vs Core-Heavy Servers

Higher clock speed is not always the better choice. Use this comparison to decide which type of server matches your software.

Choose Xeon E-Series if… Choose a core-heavy server if…
Your software relies on one or two fast threads Your software scales across dozens of threads
You run game servers, web applications or serial database queries You run large virtualization clusters, container platforms or heavy batch processing
6 to 8 cores are enough for your workload You need more than 8 cores in one server
You want a single-processor server sized to your workload You need the memory and core capacity of a dual-processor server

If you need more cores, browse our Intel dedicated servers or AMD EPYC dedicated servers.

Configure Your Server

Each server in the list above can be customized before you order. The options available depend on the specific server and location, and all prices are shown in the configurator.

Bandwidth

Servers come with either an unmetered port or a monthly transfer allowance, as shown on each server card. Higher bandwidth options can be added during configuration.

IPv4 Addresses

Add a single extra IP address or a larger subnet, from a /29 (6 usable IPs) up to a /24 (254 usable IPs).

Software RAID

RAID 0, RAID 1 and RAID 10 are listed as included options. RAID requires more than one drive: two for RAID 0 or 1, four for RAID 10.

BGP

BGP can be enabled as an optional add-on if you want to announce your own IP space or control your routing.

Specifications Overview

Server Type Single-tenant dedicated server (bare metal)
Processors Intel Xeon E-2388G, Intel Xeon E-2386G, Intel Xeon E-2288G (single processor)
Base Clock Speeds 3.20 GHz (E-2388G), 3.50 GHz (E-2386G), 3.70 GHz (E-2288G)
Cores / Threads 8 / 16 (E-2388G and E-2288G), 6 / 12 (E-2386G)
RAM, Storage & Bandwidth Vary by server and location. See the server list above for exact specifications and upgrade options.
RAID Software RAID 0, 1 and 10 (requires multiple drives)
IPv4 Additional single IPs and /29 to /24 subnets
Network Options Optional BGP add-on
Related Server Types Intel dedicated servers, AMD EPYC dedicated servers

Specifications and availability are based on the servers currently listed above and may change. Confirm the final configuration and price in the order form before purchasing.

Frequently Asked Questions (FAQs)

What is a Xeon E-Series dedicated server?

A Xeon E-Series dedicated server is a single-processor physical server built on an Intel Xeon E-Series CPU. These processors have a smaller core count than multi-socket Xeon Scalable or AMD EPYC systems, but run at high per-core clock speeds. The whole machine is dedicated to you, so its CPU, RAM and storage are not shared with other customers.

Is a higher clock speed or more cores better for a server?

It depends on your software. Workloads that depend on one or two busy threads, such as many game servers, PHP or Node.js applications and serial database queries, usually benefit from a higher clock speed. Workloads that spread work across many threads, such as virtualization at scale or large batch jobs, benefit from more cores.

What is the difference between the Xeon E-2388G, E-2386G and E-2288G?

The E-2388G has 8 cores and 16 threads at a 3.20 GHz base clock. The E-2386G has 6 cores and 12 threads at 3.50 GHz. The E-2288G has 8 cores and 16 threads at 3.70 GHz and belongs to the earlier E-2200 generation, while the E-2388G and E-2386G belong to the E-2300 generation. Available RAM, storage, bandwidth and price differ by server and location.

Are Xeon E-Series servers good for game server hosting?

They are a common choice because many game servers rely heavily on the speed of a single thread. Choose a model with enough cores and RAM for the number of game instances, players and mods you plan to run.

Can I upgrade RAM, storage or bandwidth?

Yes. The servers listed on this page are configurable, and upgrade options for items such as RAM, storage and bandwidth are available when you configure your server. The options shown depend on the specific server and location.

Is RAID included?

Software RAID levels 0, 1 and 10 are listed as included options. RAID needs more than one drive: RAID 0 and RAID 1 need at least two drives, and RAID 10 needs at least four, so check the storage shown on the server you choose.

Is the bandwidth metered or unmetered?

It varies by server. Some configurations include an unmetered port and others include a monthly transfer allowance, with higher bandwidth options available as upgrades. The port speed and allowance are shown on each server card.

Which location should I choose?

Choose the location closest to your users, players or connecting systems to keep network latency low. The locations currently available for each processor are shown in the server list on this page, and they can vary by model.

What if I need more than 8 cores?

Xeon E-Series servers in this range top out at 8 cores. If your workload needs more parallelism, look at our dual-processor Intel Xeon servers or AMD EPYC servers instead.